Pioneer GM-D505 Manual Del Propietário página 7

Connection Diagram
Fuse (30 A) × 2
Grommet
RCA input jack A
RCA input jack B
RCA input jack SUB
Connecting wires with RCA pin
plugs (sold separately).
Fuse (30 A) × 2
System remote control wire (sold separately)
Connect the male terminal of this wire to the system remote control
terminal of the car stereo (SYSTEM REMOTE CONTROL). The female
terminal can be connected to the auto-antenna relay control terminal. If the
car stereo does not have a system remote control terminal, connect the
male terminal to the power terminal through the ignition switch.
Ground wire (Black) [RD-223] (sold separately)
Connect to metal body or chassis.
Special red battery wire [RD-223] (sold separately)
After making all other connections at the amplifier,
connect the battery wire terminal of the amplifier to
the positive (+) terminal of the battery.
Speaker output terminal
See the "Connecting the Speaker
wires" section for speaker connection
instructions.
External Output
(Front and Rear output)
Fuse (25 A) × 3
External Output
(Subwoofer output)
Car stereo with
RCA output jacks
6