Kobalt 53303 Manual De Instrucciones página 3

SET-UP INSTRUCTIONS
1
1. Sawhorse in folded/carry position.
2
2. At location labeled "Open 1", press release
button and pull down legs until legs are in
contact with the leg stop.
3
3. Separate legs and push cross brace flat.
4
4. At location labeled "Open 2", press release
button and push until legs are in contact with
the leg stop.
5
5. Separate legs and push cross brace flat.
6
6. Extend legs by flipping the blue latch downward.
Slide leg in the down direction by placing foot
on the "foot" of the leg and pulling up on the
body of the sawhorse. Once at the desired
height flip the blue latch upward. Repeat steps
on the other legs. To adjust height downward, flip
the blue latch down and press down on the latch
until the metal tab disengages. Slide up leg to
desired height.
7
7. Release the 2x4 / 4x4 support arm by flipping the
latch toward the center of the sawhorse.
8
8. Adjust the support arm to the desired width,
secure the arm in position by flipping the latch
toward the outside of the sawhorse.
3