Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
• Upper pole assembly
• Lower pole assembly
• Middle pole
• Joint-fixing knob, washer and bolt (x2)
• Manual
1. Carefully remove the electric snow shovel and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the All Season Power customer service center at
1-866-225-9723.
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric snow
shovel. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils or
small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
Connecting the Poles
1. Slide the upper pole into the middle pole and the middle
pole into the lower pole. Align the screw holes (Fig. 1).
Fig. 1
Upper pole
Middle pole
2. Insert the bolts through the aligned holes in the poles and
Fig. 2
Handle Adjustment
1. To adjust the angle of the auxiliary handle, loosen
2. Rotate the auxiliary handle to a comfortable position
Fig. 3
3. Retighten handle knob securely by turning it clockwise
NOTE: In order to prevent the auxiliary handle from moving
around or sliding on the pole, be sure to tighten securely.
Lower pole
7
secure the other end with the washers and the joint-fixing
knobs (Fig. 2). Twist until tight.
NOTE: You may have to carefully move the wiring inside the
tube to one side if it blocks the path of the bolt.
Joint-fixing
knob
Washer
Lower pole
the auxiliary handle by turning the handle knob
counterclockwise.
(Fig. 3).
Auxiliary
handle
Handle knob
(Fig. 3).
Upper pole
Middle pole
Bolt
Publicidad
