TIPS AND HINTS
Extension/Quilter's Table
When using the Circular Attachment, we recommend using an extension/quilter's table. This will give extra support to the
fabric and makes it easier to control and guide the fabric. Extension/Quilter's tables are available as extra accessories.
Fabric Thickness
If you are using fabric or batting that is too thick, the pin might not hold the fabric in place. Always test by sewing on a
scrap piece of fabric.
Large Projects
When sewing on larger pieces, make sure the fabric is not allowed to hang down off of the table where it could get caught
and create drag and distortion in your design.
© 2012 KSIN Luxembourg II, S.ar.l. All rights reserved
Stabilizer
Always use proper stabilizer underneath your fabric to prevent
stretching or puckering.
Stitch Selection
Utility and decorative stiches give wonderful results with this
attachment, however, stitches with a default stitch width wider than
7mm, and stitches with backward feeding cannot be used.
Tip: The shorter the stitch, the easier it is to get a nicely joined circle.
When about to close the circle, slow down the sewing speed and if
neccessary, adjust the stitch length to fill the gap.
Appliqués
You can make appliques with the circular attachment. Use fabric
that does not fray or make raw edge appliqués. You can also
simply stitch your applique in place with a straight stitch, cut away
the excess fabric, and finish by sewing a satin stitch over the raw
edges.
When using several layers of fabric, it is even more important
to guide the fabric carefully making sure that all the layers feed
together equally.
are trademarks of KSIN Luxembourg II, S.ar.l.