Publicidad
Idiomas disponibles
Idiomas disponibles
Press the "
" button to select the desired fan speed as follows :
5. Power
By pressing the "
" button again, the device beeps and stops working.
6.
Timer
Press this button to set a scheduled stop.
7.
Sleep button
Press this key to enter sleep mode.
Notice :
Operating principle of each mode :
•
mode :
1. Once the
Operation is selected, the indoor temperature sensor operates automatically
to select the desired operation mode of operating with
2. When the ambient temperature is ≥ 24°C, the device automatically select the mode
3. When the ambient temperature is = 23°C, the device automatically selects the mode
4. When the ambient temperature is < 22°C, the device automatically selects the mode
•
mode :
1. The fan operates at low speed and the speed cannot be adjusted.
2. The compressor and the fan stop after 8 minutes of operation, then start again after 6
minutes.
3. The device adopts a constant temperature dehumidification mode and the temperature
setting is not effective.
•
mode :
1. When the ambient temperature is higher than the set temperature, the compressor switches
on.
2. When the ambient temperature is lower than the programmed temperature, the compressor
stops and the upper fan operates at the original programmed speed.
•
mode :
1. The fan operates at the programmed speed, but the compressor is not working.
2. The temperature setting is not effective.
•
mode :
or
or
.
EN
.
.
.
Publicidad
