Publicidad
Idiomas disponibles
Idiomas disponibles
(1) When the water in the container is full, the suction power disappears at this point. The
appliance will make a noise indicating that the motor is running at high speed. If this
happens, disconnect the electricity supply and pour out the water. Then put the
container back in place and switch the appliance on and it will start working normally.
(2) If the machine is turned over, it will stop working. Disconnect the electrical supply and
place the machine in an upright position, then switch it on.
(3) In the above cases, if the power is not disconnected, the motor will be damaged and may
cause a fire. Always stop using the appliance in these situations and pour out the water,
after which it can be used again.
Container Cleaning
* When work is complete or when the container is full of dust, causing a significant drop in
suction power, disconnect the electrical supply and remove the dust from the container.
1)
Unfasten the locking knob, lift the top cover.
2)
Take off the filter bag, clean the dust away in the dust container.
3)
Install the filter bag back and place the top cover.
Filter cleaning
* The filter bag should be washed with clean and warm water when it is covered with dust. If
necessary, mild detergents can be used for washing.
1)
Take off the filters
2)
Wash
3)
Dry
4)
Assemble filters
EN
FLOORCLEAN 30VO ECO
A – HEPA filter
Publicidad
