Preparations
How to load and remove CD Discs
□ To load a CD Disc
© Place the CD magazine with the disc mark facing up¬
ward, and pull out trays one after another from the mag
azine to the stopper position.
®
Place a CD disc on the tray.
@ Push the tray straightforward into the magazine until it
clicks in position.
—
Note
Be careful not to insert more than one disc on a single
tray to protect the unit from any unexpected troubles.
__
^
_
□ To remove a CD Disc
Pull out trays from the magazine to the stopper position, and
take a CD disc from each of them by hand.
Be careful not to allow the disc to drop to the ground while
taking it out.
—
Note
Carefully handle the magazine since discs may be dis¬
engaged and come out, if the magazine is placed with its
disc-inserting port facing downward.
s_^_
J
Notes
^ Be sure to use the magazine supplied with the unit as an accessory, or the optional magazine CA-
MP801D, Any other magazines can not be used.
e Never use protect film or stabilizer,commercially available as a CD accessory, for the unit because it
may cause trouble.
<
_
/