Publicidad
Idiomas disponibles
Idiomas disponibles
3 CONNECT EQUIPMENT
CONNECTION ADVICE
BEST
GOOD
SOUND QUALITY
DIGITAL CONNECTION
ANALOG CONNECTION
CONNECTION TYPE
CONNECTOR IMAGE
RCA STEREO
CABLE
NOTE: If using a S/PDIF cable to connect, be sure to set your source device to output PCM audio.
CAUTION: Do not connect a MP3 Player headphone output directly to the Sound Bar. This can result
in damage to the devices. A docking unit or equivalent conversion unit is required to adapt line level
audio to the Sound Bar.
4 WALL MOUNTING
(OPTIONAL)
1. Remove the stands from their original
configuration. See Fig. 1.
2. Flip the stand over and re-attach to the
Sound Bar. See Fig. 2.
3. Attach 2 screws to wall. Leave approx.
1-1/2" space from wall.
4. Place Sound Bar on wall screw through each
stand's center hole.
Publicidad
