Publicidad
Idiomas disponibles
Idiomas disponibles
UK
NL
DE
FR
Technical Data:
Type LED: 5 W COB
Brightness Slimlight: 350/175 Lumen
Brightness Flexlight: 200/100 Lumen
Brightness Flashlight: 280/140 Lumen
Battery: 3.7 V 2.2 Ah Li-Ion
IP rating: IP54
IK rating: IK07
Charging time: 3 ~ 4 hours
Run time: 2.5 ~ 8 hours
Working temperature: -20 ~ 50°C
Beam distance flashlight: 150m/35m
Product dimensions slimlight: 363x35x35 mm
Product dimensions flexlight: 552x35x35 mm
Product dimensions flashlight: 191x35x35 mm
Magnet: 78 N
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• Innovative worklamp with 3 in 1 quick connection
• Flashlight (Torch) with focus
• Slimlight with 180° swivel
• Flexlight with focus
• Long life LEDs (life span 100.000 hours)
• Cordless design improves safety, convenience and flexibility
• Lamp use is not affected by cold temperatures
• Made with high-quality anodized aluminium for reduced weight and extra strength
• 3.7 V 2.2 Ah Li-Ion battery provides 2.5 ~8 hours constant light output
• 78 N strong Magnet in the base
• Power indicator switch
Instructions for use:
• Charge the battery for at least 8 hours before first use
• To charge the lamp: connect the cable via the micro USB to the lamp directly. Then connect the USB plug to either the 100 ~ 240 V
adapter or any other USB power source available (Max. charging amp. 2 A) and then plug into a wall socket.
Please re-charge in good time
• The charging LED on the lamp will light RED to show that charging has commenced, the charging LED will turn green to indicate
when charging is complete
• Push the ON/OFF button to turn the lamp on (1 push) 50% setting, press again for 100% setting and press a 3rd time to turn the unit
OFF
• When the ON button becomes RED, it indicates the battery is less than 10%, please re-charge in good time
• Do not leave the battery in a fully discharged condition. Recharge the flashlight at least once every 30 days. Always fully charge the
battery to extend the battery lifetime. Always use the original charger
Accessories and spare parts:
USB-cable
100 ~ 240 V USB-charger (SIN-100.1070-2)
USB-car charger (SIN-100.0035-1)
2.2 Ah battery (18650)
Use only accessories and spare parts approved by the manufacturer.
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open fire
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, replace only by same type cable
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear
damaged as this may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
ES
Lumen Laser class I
Protection class III
EAN: 8717775519522
Colour temperature: 5800 - 6500 K
Weight: 954 g
Hydrocarbon and UV resistant
Technical data charger (SIN-100.1070-2):
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 1 A
Technical data charger (SIN-100.0035-1):
Voltage: DC 12 V ~ 24 V
Charger output voltage: 5 V 1 A
3
Publicidad
