Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you for purchasing a product STAYER!
We congratulate you for purchasing a product STAYER.
Whether you apply it to professional and DIY work, the
results will be of unquestionable quality.
The table T88 is a compact and functional universal use,
designed for basic DIY with quick folding system.
Used to measure, cut or milling, has guides for cutting
straight or angled.
1. Contens
2.Specific Specific Instructions...................................9
3.Instructions for use...................................................9
3.1 Placement tool................................................................9
3.2 Assembly Instructions............................................9
3.3 Illustrated description.............................................9
4.Maintenance and service instructions......................9
4.1 Repair Service.......................................................9
4.2 Warranty.................................................................10
4.3 Disposal and recycling.........................................10
5.Regulations.........................................................10
5.1 Technical Data......................................................10
5.2 EU Declaration of Conformity................................10
2. Specific Specific Instructions
Read all warnings and instructions pro- vided
with the saw stand. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Assemble the saw stand in the proper manner and
Ÿ
check it before each use. Proper assembly is impor- tant to
prevent the risk of a collapse of the saw stand.
Do not overload the saw stand
and do not use it as a ladder or
scaffolding. Overloading or
standing on the saw stand can
lead to the upward shifting of the
50
centre of gravity of the stand and
its tipping over.
Ensure that long and heavy workpieces do not affect the
Ÿ
equilibrium of the saw stand. Long and heavy workpieces
must be supported at the free end.
Do not clamp power tools in the saw stand. Clamped
Ÿ
power tools and sharp-edged application tools may re- sult
in serious injury.
Store the saw stand in a safe manner when not being
Ÿ
used. The storage location must be dry. This prevents the
saw stand from storage damage, and from being used by
untrained persons.
ENGLISH
9
3. Instructions for use
3.1 Placement tool
The saw stand is intended for clamping workpieces with
clamping jaws.
Place the saw stand on a firm, level and horizontal
Ÿ
surface. If the saw stand can slip off or wobble, the power
tool cannot be uniformly and securely guided.
3.2 Assembly Instructions
página
NOTE: For assembly of the T88 you will need a hammer,
flat bladed screwdriver and the provided nut diver part (U).
Assembly time is approximately 45 minutes to one hour.
Follow the sequence shown in the diagrams and described
in the steps below.
1- Emply the contents of the box and identify all
components.
2- Emply the contents of the parts pack and identity all
components
3- See Mounting (Figure 1).
4. It is recommended to start putting together the structure
of the table roll (legs).
3.3 Ilustrated description
1 - Adjustment screw base structure.
2 - Hex screw adjustment crank.
3 - Flathead screw adjustment stabilizer bar.
4 - Rubber feet.
5 - Screw fastening reinforcing legs.
6 - Gag.
7 - Key.
8 - Structure base (gag).
9 - Support for basic structure.
10 - Feet.
11 - Anti-roll bar.
12 - Cranks.
4. Maintenance and service instructions
4.1 Repair Service
Our after-sales service responds to your questions
conceming maintenance and repair ofyour product as well
as spare parts.
Exploded views and information on spare parts can also be
found under: info@grupostayer.com
Our customer consultants answer your questions
conceming best buy, application
productsand accessories.
9
(Figure 1).
.
and adjustment of
Publicidad
