Braun KF7030 Instrucciones página 7

auto on/off times in the event of a tripped breaker,
unit is unplugged, or power failure.
Setting the Time
When the coffee maker is first plugged in or when
power is restored after an interruption, the LED
control panel will start flashing 2:00 AM.
• To set the hour, press the CLOCK button (d) for a
minimum of 3 seconds. The LED control panel will
start flashing.
• Press and hold the SET button (e) to scroll
through the numbers. Release the button once
the desired hour is displayed.
• To set the minutes, press the CLOCK button.
The LED control panel will start flashing.
• Press and hold the SET button to scroll through
the numbers. Release the button once the desired
minutes is displayed.
• Press the CLOCK button again to save the desired
time.
• If during the setting process no button is pressed
for 10 seconds, the time currently set will be
saved.
NOTE: When the number count passes 12, the PM
light will be displayed on the LCD.
Before programming, always switch on the
coffee maker.
Programming and Activating the
AUTO ON Time
• Press the AUTO ON button (b) for a minimum of
3 seconds.
• The hours in the LED panel will start flashing.
• To set the hour, press the CLOCK button (d) for a
minimum of 3 seconds. The LED control panel will
start flashing.
• Press and hold the SET button (e) to scroll
through the numbers. Release the button once
the desired hour is displayed.
• To set the minutes, press the AUTO ON button.
The minutes in the LED control panel will start
flashing.
• Press and hold the SET button to scroll through
the numbers. Release the button once the desired
minutes is displayed.
• Press the AUTO ON button again to save the
desired time.
• The pre-set auto on time will disappear after
3 seconds and the time of day will show on the
LED control panel.
• If during the setting process no button is pressed
for 10 seconds, the auto on time currently set will
be saved.
This function can only be activated if the auto on
time and the time of the day have been set.
To activate the AUTO ON function:
• Press the AUTO ON button (b). The green LED
above the button will illuminate and the coffee
maker will start to brew at the pre-set auto on
time.
• The pre-set auto on time disappears after
3 seconds.
• When the appliance starts brewing, the green LED
BREW will continually flash and the LED AUTO ON
turns off.
• Press the AUTO ON button (b) again to switch off
the function: the green LED light will disappear.
NOTE: The AUTO ON function remains activated
even when the appliance has been switched off (1).
Programming and Activating the
AUTO OFF Time
The auto off time can be set in 5 minute intervals,
anywhere from 15 minutes to 5 hours. The default
setting is 2 hours.
• Press the AUTO OFF button (c) for a minimum of
3 seconds.
• The default setting (2 hours) will start flashing.
• Press and hold the SET button (e) to scroll
through the numbers. Time displayed is in
5 minute intervals.
• Press the AUTO OFF button again to save the
desired time.
• The pre-set auto off time will disappear after
3 seconds and the time of day will show on the
LED control panel.
• If during the setting process no button is pressed
for 10 seconds, the auto off time currently set will
be saved.
This function can only be activated if the auto off
time has been set.
To activate the AUTO OFF function:
• Press the AUTO OFF button (c): the green LED
above the button will illuminate and the coffee
maker stops keeping warm at the pre-set auto off
time (min. 15 minutes / max. 5 hours).
• The pre-set auto off time disappears after
3 seconds.
• Press the AUTO OFF button (c) to switch off the
function: the green LED light disappears.
For your additional safety, the appliance will switch
off automatically 2 hours after the brewing cycle is
complete if the AUTO OFF function has not been
activated.
7