Descargar Imprimir esta página

Worx STEAM STORM WX770L Serie Manual De Instrucciones página 11

Limpiador de vapor portátil inalámbrico de 20v

Publicidad

Idiomas disponibles

Idiomas disponibles

4. INTENDED USE
The machine is intended for steam cleaning.
5. OPERATING
INSTRUCTIONS
NOTE: Before using the machine, read the
instruction book carefully.
WARNING: Keep the machine pointed away
from yourself and others when operating.
Always remove the battery pack when machine is not
in use. Failure to do so could result in possible
serious personal injury
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Assemble the cleaning
accessories
NOTE: When using the fabric
steamer for cleaning, attach cloth
over it before assembling it with
the machine.
WARNING: DO NOT attempt to connect any
accessories while the machine is emitting
steam. Doing so could result in burns or other
injury.
Installing/removing the battery
pack
Checking the battery condition
NOTE: Fig. C only applies for
the battery pack with battery
indicator light.
Charging the battery pack
20V Cordless Handheld Steam Cleaner
Filling with water
NOTE: Please fill with cool water
or you will cause damage to the
water tank.
NOTE: It is suggested to use
distilled or demineralized water if
your water contains a high level
of mineral content.
NOTE: Please ensure that the
water level in the water tank
remains sufficient, and refill the
water tank promptly whenever
the water level is low. Turn off
the steam cleaner before refilling
the water.
NOTE: It's possible that there is
some leftover water in the water
tank that remained from testing.
OPERATION
Press and hold down the on/off
FIGURE
button for 2 seconds to turn on
the machine
- The white light will start
See Fig. A1,
flashing and then will become
A2, A3
solid before the machine starts
to work.
- Wait for about 8 seconds for
See Fig. A4
the steam to come out.
NOTE: When using the machine
for the first time, it will take a
little longer (≈20 s) for the steam
to come out.
NOTE: When you use your
SteamStorm for the first time
or after it has been idle for a
See Fig. B1, B2
long period, it will automatically
perform a self-check to ensure
that all systems are functioning
properly. This process may take
See Fig. C
up to 20 seconds before steam
is generated.
See Fig. D
people, pets, and plants before
pressing the on/off button.
Steam cleaning
-Use a slight back-and-forth
motion over the area you are
steaming.
NOTE: Please ensure that the
ball valve is submerged in water
during use.
the steam cleaner is working
WARNING: Keep the
steam cleaner away from
WARNING: Do not touch
the steam outlet area while
See Fig. E1, E2,
E3, E4
11
See Fig. F
See Fig. G
EN

Publicidad

loading