MAXI-MATIC Elite Gourmet EGC007 Manual De Instrucciones página 10

TROUBLESHOOTING
PROBLEM
Power
Indicator Light
is already ON
after plugging
into power
outlet.
There are
brown stains
on the
Heating Plate.
Eggs are
overcooked
or
undercooked.
CAUSE
The Power
Button was
unintentionally
pushed to ON
prior to
plugging into
power outlet.
Residue from
usage.
Not enough
water was
used.
POSSIBLE SOLUTION
You cannot push the Power Button
again to turn the egg cooker OFF. Fill
Measuring Cup to "Soft" line, pour into
Heating Plate and plug the Cooker
into power outlet. The Egg Cooker
will cycle through and power OFF
automatically once all water has
evaporated. The Power Indicator
Light will turn off. Allow the unit to
rest/cool for 5 minutes and proceed to
follow the instructions in this manual
to use as normal.
Use a paper towel or a dish rag and
white vinegar to clean the Heating
Plate.
Be sure to use Measuring Cup for
appropriate amount of water.
If eggs are overcooked, be sure to
remove the eggs promptly when unit
beeps.
If eggs are undercooked, your eggs may
be XL or very cold, use additional
water and leave eggs in the Egg
Cooker for an extra few minutes after
unit beeps.