TECshow MAGIC CUBE Manual De Usuario página 8

Total use time
The Use Of Time
LED Temperature
Expe Password
↓
6. LCD DISPLAY
If you use a universal DMX controller to control the
units, you have to set DMX address from 1 to 512 so
that the units can receive DMX signal. Rotate MENU
knob to enter menu mode, select DMX Functions,
press knob to confirm, press knob to select DMX Ad-
Channel mode
19 channels
24 channels
124 channels
7. CHANNELS CHART
Channel modes
1 1 1
2 2 2
3 3 3
P. 8
Tecshow Magic Cube | English version
This is the time we have used for the light from the production so far.
This is the time when we use the light on the electricity
This is LED temperature display
Adjust the calibration data
↓/↑ LCD Reverse
Unit 1 Address
1
1
1
Function Value
Pan 0~255
Pan Fine 0~255
Tilt 0~255
dress, press knob to confirm, the present address
will blink on the display, rotate the knob to adjust
the address from 0 to 512, press the knob to store.
Please refer to the following diagram to address
your DMX512 channel for the first 4 units
Unit 2 Address
20
25
125
Pan (8bit)
Pan Fine (16bit)
Tilt (8bit)
Unit 3 Address
39
49
249
Detail information
Unit 4 Address
58
73
373