Publicidad
Idiomas disponibles
Idiomas disponibles
2610051969.qxp_IDH182 IWBH182 1/15/19 10:39 AM Page 10
any assembly, adjustments or changing
accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
INSERTING AND REMOVING
ACCESSORIES
(Model IDH182 only)
chuck by pulling on bit after it has been
inserted. The chuck accepts only standard
1/4" hexagonal shank accessories with
power groove.
Your tool is equipped with a Socket-Ready™
quick release chuck. The Socket-Ready™
chuck includes a 1/4" hex chuck designed for
impact ready bits and accessories and a 1/2"
square drive for use with impact wrench
sockets.
When using the 1/4" hex chuck insert a bit or
accessory by simply pulling the locking sleeve
forward and inserting the desired accessory
into the chuck and release locking sleeve
(Fig. 2). To remove a bit or accessory, pull
locking sleeve forward and simply remove it
from the chuck.
(Model IWBH182 and IDH182 only)
When using the 1/2" square drive, attach only
high quality impact ready accessories with the
proper size square drive designed for use with
impact wrenches. To install a socket, simply
push completely onto output drive.
INTENDED USE
This tool is intended for the fastening and
loosening of bolts, nuts and various threaded
fasteners. This tool is not intended for use as a
drill.
VARIABLE SPEED CONTROLLED
TRIGGER SWITCH
Your tool is equipped with a variable speed
trigger switch. The tool can be turned "ON" or
"OFF" by squeezing or releasing the trigger.
The speed can be adjusted from the minimum
to maximum nameplate RPM by the pressure
you apply to the trigger. Apply more pressure
Assembly
Disconnect battery pack
from tool before making
To avoid loss of control,
ensure bit is locked in
Operating Instructions
LOCKING SLEEVE
FIG. 2
FRICTION
CHUCK
SCREWDRIVER
BIT
BIT HOLDER
FIG. 3
SOCKET
to increase the speed and release pressure to
decrease speed (Fig. 1).
BRAKE
When the trigger switch is released it
activates the brake to stop the chuck quickly.
This is especially useful in the repetitive
driving and removal of screws.
VARIABLE SPEED CONTROL SELECTOR
The speed of the power tool can be adjusted
by toggling the variable speed control on the
foot of the drill. The speed of the drill is
indicated by the indicator lights at the foot of
-10-
RING
SCREWDRIVER BIT
OUTPUT
DRIVE
Publicidad
