Publicidad
Idiomas disponibles
Idiomas disponibles
USING YOUR STEAM STATION IRON
The appliance has two iron portions. You can use dry ironing or steam ironing.
The details refer to the following:
Dry ironing
1. Put the iron on the steam station iron's thermal insulating cushion.
2. Connect the plug to wall outlet, one "D" sound of buzzer can be heard and
the temperature indicator starts to illuminate.
3. Turn temperature dial to your desired setting, which is depended on the fabric
of garment, refer to IRONING TIPS latter. The soleplate starts to be heated up
and the temperature indicator begins to flash.
4. When the temperature indicator changes from flashing to illuminating, it
means the selected temperature is reached and you now can start ironing.
NOTE: Do not continuously operate the appliance for 1 hour.
WARNING: Never touch hot soleplate at any time before cooling down!
Dry ironing
Grasp the water tank handle with the hand and press the tank release button
with one finger to move out the water tank. Open the filling cap and fill water
into the water tank. You had better use purified water with less calcium
particles. After it, close the filling cap. The max capacity of water tank is 1.8L,
the water level shall not be exceeded the MAX mark.
Note: If the tap water in your area is very hard, we advise you to mix it with an
equal amount of distilled water.
2. Replace the detachable water tank properly.
Note: If the water tank is not properly placed, the iron does not produce any
steam.
3. Put the iron on the steam station iron's thermal insulating cushion.
4. Connect the plug to wall outlet, one "D" sound of buzzer can be heard and
the temperature indicator starts to illuminate.
5. Turn temperature dial to your desired setting, which is depended on the
fabric of garment, refer to IRONING TIPS latter. The soleplate starts to be
heated up and the temperature indicator begins to flash.
6. When the temperature indicator changes from flashing to illuminating, it
means the selected temperature is reached and the steam is ready for ironing.
Note: During ironing, the temperature indicator goes on from time to time. This
indicates that the iron is heating up to the set temperature.
Note: The system may occasionally produce a pumping sound during steam
ironing. This is normal and tells you that water is pumped into the soleplate.
7. Press the steam trigger to release steam for ironing.
Caution: 1) Do not touch hot soleplate at any time before cooling down!
2) Never direct the steam at people!
Publicidad
