Betzold 56692 Instrucciones De Montaje página 6

Assembling instructions: Sink
Warning! To be assembled by adults only. Please check, before assembling,
that there are no missing parts. In case of missing pieces,
contact the address mentioned under "Guarantee".
4 Feet (D) 1 Bottom pieces (E)
1 Cover (F) 2 Side parts(G)
1 Back wall (H) 2 Door wings (O)
1 Intermediate strip (J) 1 Cover element (K)
1 Sink (L) 1 Operating device (M)
4 Strips to fasten 1 Inside board (N)
side- and back pieces (I)
Fastening material:
1. Begin by screwing the two back feet (D) to the bottom piece (E).Simultaneously
fasten the two back strips (I) to the bottom piece.Use two screws C.
(Drawing 1-3)
2. Now insert the inside board (N) into the strip (I) back left. (Drawing 4)
3. Now use a screw C to fasten the foot (D) to the bottom piece (E).
Simultaneously fasten the strip (I) front left to the bottom piece. (Drawing 5+6)
4. Now insert the two door wings (O) into the bottom piece (E). (Drawing 7)
5. Use a screw B to fasten the intermediate strip (J) onto the strip front left (I). Make sure, the two door wings (O) are attached to the intermediate strip (J). (Drawing
8)
6. Now push the cover element (K) into the strip front left (I). Drawing 9)
7. Use a screw C to fasten the foot front right (D) to the bottom piece (E). Simultaneously fasten the strip front right (I) to the bottom piece. Use a screw B to fasten
the cover element (K) to the strip front right. (Drawing 10+11)
8. Push the two side pieces (G) left and right between the front and the back strips. Push the back piece (H) between the two back strips. (Drawing 12 -13 -14)
9. Use two screws D to fasten the operating device (M) to the cover (F) (Drawing 15)
10. Now put the cover piece (F) on. Attach the cover to the four strips (I), using four screws A. (Drawing 16)
11. Finally insert the sink (L) into the cover. (Drawing 17)
Art.-Nr. 56692
4 Pieces
2 Pieces
4 Pieces
2 Pieces
1 Piece
6
© Arnulf Betzold GmbH