Publicidad
Idiomas disponibles
Idiomas disponibles
8
OPERATING INSTRUCTIONS
CHECK ALCI EVERY TIME YOU USE THIS INTERCHANGEABLE
This interchangeable hot air blow dry brush is equipped with an
Appliance Leakage Circuit Interrupter (ALCI), a safety feature that
renders it inoperable under some abnormal conditions, such as
immersion in water. To make sure the ALCI is functioning properly
and the exclusive water sensing system (ALCI) is working, perform
the following test:
1. Plug in the interchangeable hot air blow
dry brush and press the test button on
the plug.
2. The interchangeable hot air blow dry
brush will stop working. There will be
an audible click and the reset button
will pop out.
3. To reset the ALCI with a Reset button:
Unplug the unit. Then push the Reset button in, and reinsert
the plug into the outlet.
4. Be sure to repeat the test every time you use this interchangeable hot
air blow dry brush to confirm the ALCI is operational.
5. If the ALCI is not functioning properly, return the interchangeable hot
air blow dry brush to a service center.
6. If a water immersion occurs, bring this unit into a service center. Do
not try to reset.
Should the dryer go off and the Reset button pop out during use, this
could indicate a malfunction in the dryer. Remove the plug from the outlet
and allow the dryer to cool. Reset the ALCI. Reinsert the plug into the
outlet. The dryer should function normally. If not, return it to a service
center for examination and repair.
T3 AIREBRUSH DUO
HOT AIR BLOW DRY BRUSH
RESET
TEST
Publicidad
