Narwal Freo X Plus Manual Del Usuario página 6

Fix the moisture-proof pad
Once the base station is put in place, wipe
the indicated area clean with a dry cloth,
peel o the double-sided tape on the back of
the moisture-proof pad, and stick the map
onto the floor as indicated.
Note:
1. The moisture-proof pad only applies to the
wooden floor.
2. To remove the pad from the floor, please
keep it slow to avoid residual glue.
Add Water
Before mopping, add clean water to the
water tank.
· Open the robot's top cover, remove the
water tank. Fill the water tank with clean
water through the tank opening.
· Close the tank, put it back into the robot,
and place the robot's top cover back.
Boot se ings
Push the robot into the base station and
ensure the charging contacts are properly
connected. The base station indicator goes
out and the robot will turn itself on and
broadcast a message.
Connect and bind the robot in the App
Scan the QR code to download the Narwal
App, tap "Add Device" and select the model
in the App, and follow the instructions for
connecting and binding the robot.
Note：
1.Tap "Se ings"-"Device" in the App, then
long press the "Restart Robot" for 10s to
switch on/o the Standby Mode.
—Only available in the US market.
3. How to Use
Before using the robot, please make sure you have finished the installation and
base station setup in Chapter 2.
3.1 Organize the home environment
A.Put away the clu er on the floor,
e.g. sca ered cables, rags,
slippers, clothes and books.
B.Open the doors of the rooms to
be cleaned and arrange the
furniture to leave as much space as
possible for cleaning.
05