Medion P20 XXL Twin Guida Rapida página 117

.. Interrupting a programme
Interrupting the programme for one fryer drawer
 Press the zone  selection button (36).
 Then press the
 (18).
button lights up continuously and the zone  selection button flashes.
The
 Press the zone  selection button (27).
 Then press the
 (15).
button lights up continuously and the zone  selection button flashes.
The
Interrupting the programme for both fryer drawers
 Press the
button (29) to interrupt the cooking process for both fryer drawers
(15/18).
The button (29) stops flashing and a signal tone is emitted.
 Pull out the fryer drawer (15/18) to check cooking progress or to redistribute the
food.
 Place the fryer drawer fully back into the appliance.
 Press the
button (29) again to continue the cooking process.
The time then continues automatically.
.. Ending the programme
At the end of the cooking time, the heating element switches off and signal tones
are emitted.
 If you want to completely abort the cooking for both zones, press and hold the
standby button
 Pull the mains plug (8) out of the mains socket.
 Pull the fryer drawers (15/18) out of the appliance using the handles (2/5). Place
the fryer drawers on a heat-resistant surface.
 Remove the food from the fryer drawers (15/18) using a suitable utensil.
118
button (29) to interrupt the cooking process for fryer drawer
button (29) to interrupt the cooking process for fryer drawer
(30) until the appliance switches off.