Milwaukee 48-22-8572 Manual Del Operador página 4

ASSEMBLY
Be sure to follow the assembly instruc-
NOTICE
tions for the appropriate bench. Do not
use power tools to assemble bench. Tighten bolts
with hand wrenches.
Tools Required (Not Included)
Phillips
screwdriver
Hardware Included
NOTE: Items not shown in actual size. Hardware
lengths are approximate.
Hardware Item
AA
BB
CC
DD
EE
FF
GG
HH
Item
Shelf Hinge Bracket
Safety 10 mm
goggles Wrench
Description Quantity
Bolt M6 x 16L
Screw M4 x 12L
Screw M4 x 16L
Nut M6
Shoulder Bolt
M6 x 8L
Nylon Washer
19 x 8.5 x 1.5
Screw M6 x 16L
Bolt M6 x 16L
Description Quantity
Side handle
Front Bumper
12
NOTE: Begin product asembly close to the final
intended location of your bench. This product is
heavy and may be difficult to move after assembly.
12
Attaching the Side Handle
Attach the side handle to both sides of the work
bench using four bolts (AA) per handle.
NOTE: The holes in the bench are tapped and do
12
not require nuts.
2
2
2
2
Installing the Corner Extrusions
Place the front bumpers on both ends of the extrusion
by sliding the extrusion into the cavity of the bumpers.
8
Attach the front bumpers with extrusions using two
screws (CC) per bumper.
Attach the two rear bumpers to the back of the lower
bench using two screws (CC) per bumper.
2
2
4
4
Rear Bumper
Corner Extrusion
Cord Storage Bracket
Bottle Opener
Hex Key
and Bumpers
2
2
4
1
1
AA
CC