TCL LINKZONE MW45V2 Guia De Inicio Rapido página 32

2. Quick Setup
Launch the Internet browser and enter http:/ /192.168.1.1 in
the address bar. Enter the password to log into the LINKZONE
configuration page. For the default logging password for the
WebUI, refer to the label under the battery and on the sticker on
the rear of the back cover.
Log in and click "Settings" to configure the basic settings.
Wi-Fi Settings:
• SSID: Set the Wi-Fi name of this device.
• Security: Configure the security mode for Wi-Fi connection.
3. Charging the device
You have two ways to charge your device.
Charging with an adapter
Connect a USB cable between the device and the head of the
adapter and plug it into a power socket to start charging.
When the device is powered off, it takes a maximum of 3 hours
before being fully charged.
Charging via USB
You can also charge the device by connecting it to a PC with
the USB cable.
When the device is powered off, it will take a maximum of 4
hours to finish charging.
Note: In order to protect the battery, when the low power LED
indicator flashes, charge the device as soon as possible.
EN - 12