Costway EL10003 Manual Del Usuario página 2

Function Diagram
EN
Move left to
reveal the
main keyhole
Handle
Opening method for the first use
Insert the main key into the left keyhole and turn it clockwise to the limit,
slide the emergency key cover to the right, insert the emergency key into the
right keyhole, turn it counterclockwise to the limit and hold it; then turn the
handle clockwise to open the door.
ATTENTION: DO NOT LEAVE THE BACKUP KEY IN THE SAFE, OR
THE SAFE CANNOT BE OPENED IF THE ELECTRONIC SYSTEM
MALFUNCTIONED.
How to change the password
There are two sets of independent initial password: 1234 and 123456
Modify 1234: When the door is open, press the green button on the inside
of the door, the yellow light will light up, enter any 3-8 digit password, press
"#", and confirm, the password is modified successfully.
Modify 123456: When the door is open, press 0 twice, then press the green
button on the inside of the door, the yellow light is on, enter any 3-8 digit
password, and press "#" to confirm, the password is successfully modified.
Battery box
4*AA batteries needed
(Not Included)
Move right to reveal
the emergency keyhole
External battery box
connector with
Android Micro-USB
(USB Data Line Not
Included)
02
Vibration Alarm
1. Press the "*" key to automatically enter the automatic alarm state. Enter
the correct password when alarming, and the alarm can be canceled.
2. After each opening, the vibration alarm is turned off and needs to be
turned on again.
3. If the password is entered incorrectly 3 times in a row, the alarm will be
turned on. Enter the correct password to cancel the alarm.
Emergency Handling Methods
When it is out of power, you can use the power bank to supply power. If you
forget the password, you can use the emergency key to open it.
Operation for Internal Door's Password
Step to set the password lock
Turn Front View
1. The initial password is 000.
2. To set a new password, first turn the password
to initial 000, then turn knob clockwise to open the
door; adjust the setting key from A to B (as shown
in the figure).
3. Turn the password you need on the password
Setting key Back View
disk, and then adjust the password setting key to
"A".
4. After setting, the new password is set
successfully, and the initial password no longer
works.
NOTE: PLEASE REMEMBER THE PASSWORD OR
YOU CAN'T OPEN THE DOOR.
Internal Partition Installation
Take out the removable partition, and freely
distribute space for installation; There are 4
adjustable heights for partition board, which is
10-24cm from the bottom board.
03