Publicidad
Idiomas disponibles
Idiomas disponibles
3. It is recommended to adjust the depth wheel so
that the edger blade just touching the ground or
breaks the surface of the soil by no more than 0.2
in. (5 mm)
4. Tighten the wing nut. Check the depth of cut
while standing in the normal working position and
correct it if necessary.
B1
B2
EN
a
OPERATION:
Starting the edger (See Fig. C)
C
1. Push the Safety Lock Off Lever forward first, then
squeeze and hold the throttle trigger to start the
machine
8
2
a
15m (50ft)
NOTE: More details can be found in the power head
manual.
TRANSPORTATION
Transporting the edger
1. Switch off the edger and remove the battery.
2. When transporting your edger by hand, hold the
middle of shaft to make sure that your machine is
parallel to the ground.
3. When transporting your edger in a vehicle, secure
and position it to prevent movement or damage.
For Battery tools
The recommended ambient temperature range for
discharging is -4°F~113°F (-20 ~45 ).
The recommended ambient temperature range for
the charging system during charging is 23°F~113°F
(-5 ~45 ).
MAINTENENCE
Replacing the blade (See Fig. D1, D2, D3)
D1
D2
2
1
Publicidad
