Descargar Imprimir esta página

Pontec PondoSolar 150 Instrucciones De Uso página 8

Ocultar thumbs Ver también para PondoSolar 150:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
- EN -
Product Description
 A
Quantity
1
1
2
1
3
1
4
4
5
1
6
1
7
4
Installation and connection
How to proceed:
 B
1. Assemble the nozzle unit and fit onto the pump.
– Adapt the number of nozzle extensions used to the depth of the pond.
2. Connect the connection cable to the solar module.
– Push the plug completely into the socket (up to the stop) to ensure that the connection is watertight.
– Switching on: Connect the pump to the solar module.
– Switching off: Disconnect the solar module from the pump.
3. Assemble the ground stake set and attach it to the solar module.
– Ensure that the connection cable is routed downwards.
4. Install the unit in the pond in a horizontal position on firm, sludge-free ground and ensure that it is completely cov-
ered with water.
5. Install the solar module so that it is exposed to direct sunlight.
– Recommendation: Align the solar module to the sun to ensure maximum energy yield.
Maintenance and cleaning
The unit has to be taken out of the water for cleaning or maintenance.
Cleaning the device
• Never use aggressive cleaning agents or chemical solutions. These could attack the housing surface or impair the
function.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Vinegar- and chlorine-free household cleaning agent.
How to proceed:
1. Disassemble the unit.
2. Clean the filter housing and impeller unit. (→ Replacing the impeller unit)
3. Pull the nozzle unit apart.
4. Clean all parts.
– Use a soft brush as an aid.
– Rinse parts in clean water.
5. Clean the solar module with a damp cloth and wipe dry.
6. Reassemble the unit in the reverse order.
Replacing the impeller unit
How to proceed:
 C
1. Pull the filter housing from the pump.
2. Remove the foam filter from the filter housing and rinse it out.
3. Pull the cover off the impeller unit (push-fit fastening, lever out carefully).
4. Pull out the impeller unit and clean or replace.
5. Reassemble the unit in the reverse order.
8
Description
Filter housing
Pump with outlet and 5 m connection cable
Nozzle holder
Nozzle attachment
Solar module
Ground stake set
Nozzle extension

Publicidad

loading