Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Step 4:
4a. Move vanity (B) into proper place against the wall.
Step 5:
5a. Install faucet, drain and supply lines (none included) to vanity top (A)
according to the instructions supplied with those items.
Step 6:
Removing the Drawer:
6a. Unload the contents from the drawer.
6b. Slide out the drawer as far as it will go.
6c. Press the lever down on the right-hand track and lift the lever up on the
left track to release the drawer. Pull the drawer out the rest of the way.
Replacing the Drawer:
6d. Align the drawer guides with the glides.
6e. Hold the receiving glides firmly and insert the drawer guide.
NOTE: It is normal for the drawer to close tightly the first time after it
has been removed. If the drawer does not go in smoothly, please take
it out and repeat the step.
6f. Push the drawer in completely.
4
B
5
6
4
ASSEMBLY INSTRUCTIONS
Step 7:
7a. In case of uneven floors, floor levelers are provided at the bottom of the
vanity. If necessary, adjust floor levelers by hand to correct tilting and/
or level doors.
Step 8:
8a. To mount the backsplash (C) to the wall, apply a thin bead of silicone
compound (not included) to the unpolished back side and bottom of
the backsplash (C). Position backsplash (C) as shown onto vanity
A
top (A) and against the wall. Clean any excess silicone compound
before allowing to dry.
7
8
C
5
Silicone
A
Publicidad
