Publicidad
Idiomas disponibles
Idiomas disponibles
other. Be gentle, and don't force the plug into the socket. To reduce the risk of
electric shock, this plug will fit in a polarized outlet only one way. If the plug
doesn't fit into the outlet, reverse the plug and try again. If it still doesn't fit, call
a qualified electrician to install a suitable electrical outlet. Do NOT modify the
plug in any way.
10. Ensure that the immersion blender's power needs won't cause problems with
your electrical wiring! Ensure that the hand blender's maximum power usage
(200 Watts) does not exceed the capabilities of your circuit breaker or fuses.
11. If it's necessary to use adapters, multiple sockets, or extension cords, make sure
they comply with local electric safety standards. Do not exceed power consump-
tion limits.
12. When unplugging the immersion blender, do not tug on the power cord. Grab the
head of the cord and gently remove it from the socket.
Blade Safety
1. Keep your hands and utensils away from the blades while the hand blender is
running. Severe injury can occur if you come in contact with the turning blades.
2. Please, handle the blades carefully! They are very sharp, and can cut or seriously
injure you if you aren't careful. Never manipulate the blades unless the unit is
unplugged and the blades are fully stopped.
3. If your blades get jammed while the hand blender is running, USE CAUTION.
Make sure that you unplug the immersion blender before trying to fix the prob-
lem.
Food Safety
1. Do not process very hot foods (maximum temperature: 140° F / 60º C).
2. Take care to remove any fruit pits, bones, etc. from foods before blending to pre-
vent breaking blades and/or damaging gearing.
3. Chop/quarter or otherwise cut up hard/solid foods as necessary to aid in fast,
even blending.
4. Don't leave your blender immersed in hot liquids during cooking. Use the blend-
er and remove it as soon as possible.
5. When aerating/beating mixtures, keep the blade/attachment just below the sur-
face of the liquid to facilitate intake of air.
6. Be careful not to damage cookware that uses non-stick coating. If possible, use
with stainless steel, aluminum, or other durable metal cookware.
7. Don't immerse the blender too deep; the seam between the power han-
dle and the shaft should be at least an inch above the liquid level line.
SAVE THESE INSTRUCTIONS
4
Publicidad
