Deleycon MK5218 Guia Del Usuario página 17

7.4 description and function
crimping tool
Developed for a high-quality crimping result of cable and modular plug. With the pliers
you can also cut and strip your cable, the blades are in the central part.
LSA application tool
Use the LSA insertion tool to make connections between cable cores and insulation
displacement connectors. Area of application is e.g. B. the home network to connect the
individual wires of a network cable with the insulation displacement connectors of a
patch panel or a network socket. LSA means no soldering, no screws and no stripping.
Stripping and cutting tool
Handy tool for quick and clean stripping of network cables. The blades in the middle part
are suitable for flat cables and as a cutting tool. Suitable for network cables, speaker
cables for cable diameters from 3.2mm to 9.5mm. The blade height is infinitely
adjustable with an adjusting screw on the front.
Cable tester network - LAN tester
The network tester has two test modes. Master unit with RJ11 and RJ45 socket. Remote
unit with RJ11 and RJ45 socket.
Sweep mode:
Each data line is individually tested on the master unit
a signal is sent on the first pin, the LED for pin 1 lights up
Master unit and remote unit green etc.
Slow Sweep Mode:
This variant checks slower than the first.
This ensures that the cable with plugs is continuous and that the assignment is correct.
All 8 or 6 data lines as well as mass (ground) are checked
9V block battery is not included.
Stripper for coaxial cable (adjustable)
Handy tool for quick and clean stripping of coaxial cables. The 2 blades strip the outer
jacket and dielectric in one step. AThere are two adjusting screws on the underside, with
which the blade height can be continuously adjusted. The stripper is suitable for round
cable types for cable diameters from 3mm to 7mm (adjustable). Blade distance
adjustable from 3mm to 12mm.
Application tool, insulation displacement plastic
19.09.2023 17