Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
LEGRAND
REF. A20980309S
Depth 60mm
1
3
GENERAL SAFETY INFORMATION
_____________________________________________________________________________
>
To reduce the risk of death, personal injury, fire, electric shock,
falling parts, cuts / burns and other hazards, read all warnings and
instructions included with the appliance box as well as all labels.
>
Before installing or maintaining this equipment, follow the
instructions in this manual. For a residential installation, if you
are unsure whether to install or maintain the luminaire, consult a
licensed and qualified technician.
>
DO NOT INSTALL THE PRODUCT IF THE SAME IS DAMAGED
>
To prevent injury or damage to the assembly of this product,
make sure the conductors and screws are secure before connecting
the power.
>
Young children should be supervised to ensure that they do not
play with this product.
>
Handle the installation carefully to avoid any damage or breakage.
>
For installation, select an appropriate location away from liquids
and hazards. Make sure that the connection does not come into
contact with corrosive materials or surfaces, chemicals, etc.
>
Turn off the power and let it cool before cleaning. To clean, use a
clean, damp cloth. Never immerse the appliance in water.
>
Lamp replacement and maintenance: disconnect power and allow
fitting to cool down before cleaning or replacing.
>
Check that the supply voltage is correct compared to the
informative label of the luminaire.
Depth 60mm
2
2-5Mtrs
4
INSTALLATION INSTRUCTIONS
_____________________________________________________________________________
Prepare the luminaire, accessories and tools, confirm the installation
location and wire length.
①
Drill 2 Φ8mm holes with a depth of 60mm in the wall, fix the
lamp to the wall with plugs and screws.
②
Drill 2 Φ8mm holes with a depth of 60mm on the wall, fix the
solar panel on the wall with anchors and screws.
③
Connect the wire from the solar panel to the lamp and tighten
it tightly.
④
Press the button on the luminaire to activate the remote
control, then use the remote control to set the desired working
mode.
IMPORTANT
_____________________________________________________________________________
1. This is a solar energy lamp, please install it in a place where it can
get sunlight.
2. Lighting time depends on the duration of sunlight and working
mode.
3. During the day, the luminaire can charge the solar batteries, even
when it is turned off.
4. Do not place the battery with household trash to avoid explosion.
5. The luminaire is equipped with an internal battery, which can be
replaced.
6. The light source and separate control device can be removed by a
qualified person without permanent damage to the luminaire.
[ EN ]
3
Publicidad
