Getac K120-Detachable Keyboard 2.0 Guida Rapida página 3

Introduction
This detachable keyboard provides keyboard
and touchpad functions to K120. With the key-
board, you can use K120 in different usage
modes as shown below.
Tablet Mode Convertible Mode*
Notebook Mode Presentation Mode*
* Not supported if the high capacity battery
packs are installed.
Identifying Components
No. Component
Handle
Security lock
Tablet release latch
Keyboard
Touchpad
No. Component
Indicators
Cover latch
Power connector
Kensington lock
Attaching and Detaching
Attaching
1. Make sure the cover of the power
connector on K120 Tablet is closed
and locked.
2. Depending on the desired usage mode, have
K120 Tablet face inwards or outwards. Align
and put K120 Tablet down on the holder (
The release latch should click into place.
3. Slide the lock of the release
latch upwards to the locked

position ( ).
Detaching
1. Slide the lock of the release
latch downwards to the

unlocked position ( ).
2. Push the release latch toward the right, and
while holding the latch (

the holder ( ).

).
Notebook mode
Convertible mode
Presentation mode

), lift K120 out of
1