Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Package contents
1 x folding lounger chair
1 x instructions for use
Technical data
Dimensions with backrest in highest position:
approx. 61 x 104 x 78.5cm (W x H x D)
Height of the lowest backrest position
approx. 93.5cm
Depth of the lowest backrest position
approx. 87.5cm
Maximum load: 100kg
Date of manufacture (month/year):
04/2021
Intended use
This product was designed as outdoor camping
furniture for private use for a person weighing up
to 100kg.
Safety information
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of suffo-
cation.
• The product could become unstable and tilt
sideways and/or fall over. This could lead to
injury or damage.
• Do not use the product near open fire.
Risk of injury!
• Mind your fingers in particular when folding
and unfolding the product. There is a risk of
injury from crushing.
• Only use the product for its intended use.
• The product may only be used by one person
at a time.
• Make sure that the product is placed on a
stable, even surface.
• Do not stand or bounce on the product or use
it as a step ladder.
• Observe the maximum load capacity of
100kg. Exceeding the weight limit can dam-
age the product and/or lead to injury.
• Check the product for damage or wear
before each use. Only use the product if it is
in perfect condition! Do not use the product if
it is visibly damaged or if you suspect that it is
damaged.
• You may only sit on the seat part of the
product.
• Only sit on the product when the hooks are
attached to the frame.
Preventing damage to the
product!
• The manufacturer accepts no liability for
accidents which occur as a result of ignoring
the safety information above or inappropriate
handling.
Assembly
The product is already fully assembled. You
only need to fold the product out and attach the
hooks (1a) to the frame.
1. Remove the product (1) from the packaging
and fold it out (Fig. A).
2. Check that each of the hooks (1a) are led
through the metal loop (1c) before being
locked into a hole position (1b) (Fig. B).
3. Stick the ends of the two hooks (1a) into one
of the three hole positions (1b) of the frame as
shown in Figure B.
GB/IE
7
Publicidad
