EKSA Telecom H1 Manual Del Usuario página 8

Bluetooth Pairing
2. Turn on the Bluetooth of the device and select "EKSA H1". After successful
connection,the LED flashes slowly in blue light, and you will hear the voice
prompt "your headset is connected".
EKSA H1
Note:
1. When connecting the device, please keep the headset and the device within 1 meter.
2. If necessary, the PIN code is "0000".
3. If there is no connection with any device for 10 minutes, the headset will automatically
shut down.
4. After the headset is turned on, it will automatically connect back to the last connected
device.
3. When connecting to a new device, turn off the Bluetooth of the curretnly
connected device and then confirm that the headset enters the Bluetooth
pairing state.
EKSA H1
Device 1
3"
EKSA H1
Device 2
6
1. Turn on the headset, the
bluetooth indicator flashes
alternately in red and blue,
indicating that the headset is in
pairing state.