Publicidad
Operation & Setting & Troubleshooting
Reset Function:
Troubleshooting：
a, Keep pressing the " " button until the desk reaches
the lowest position, and release it; then keep pressing
the " " button until the display shows the current
height, release the " " button and the reset completes
b. Press the "3" and "4" buttons simultaneously for 3
seconds to check the software version number of the
entire machine; after checking, continue to press the
"3" and "4" buttons, when the LED display shows
"
", the desk starts the reset process; Then Keep
pressing the " " button until the desk the
display shows the current height, release the " "
button and then the reset completes
c. When the lifting system fails, keep pressing the
" " button until the desk reaches the lowest position
and release it; then keep pressing the " " button until
the display shows the current height, release the " "
button and the reset completes .
a. Reset: When the LED shows" " , press"
button until the desk reaches its lowest height and
rebounds to stop, it means the reset has been finished.
b. When it doesn't work and the LED shows "E01" or
"E02", please retry 18 minutes later.
c. If the "
" button doesn't work, please check the
cable connection and then cut off the power for at least
10 seconds. Reconnect to the power and press "
button to start the reset process when it shows the
"
".
d. If all these above process are inefficient, please
contact our customer service.
25
"
"
Publicidad
