Leica CINE 1 Instrucciones Abreviadas página 30

Place the corner connectors (
P
the holes.
Note: Do not tighten the corner connectors (
Six screws need to be used for the outer frame long side and three for the outer frame short side.
• Align the components L1 , L2
Look at the screen from a horizontal perspective. If the screen looks black, it is correctly positioned and ready to be attached to the wall. If the screen looks
white, rotate it and then attach it.
• Once the installation is complete, the front and back of the screen should look as pictured below.
) on the four corners. Once the corner connectors (
) too firmly as a high torsional force can make them slip. The force should be less than 0.3 Nm.
P
, and M with the corners of the frame and the holes.
Front
) are fully positioned against the outer frame, fully tighten the screws in
P
Back