Publicidad
Idiomas disponibles
Idiomas disponibles
4
PRODUCT INSTALLATION
INSTALLATION STEPS (CONT.)
2. Install the filter and hoses
1. Connect the T-valve to the tank.
Water tank inlet
T-valve
2. Connect the existing water pipe to the
T-valve.
T-valve
Existing water pipe
3. Turn on the water supply
1. Turn the water back on by turning the knob
on the supply angle valve counter-clockwise
until the valve is fully open.
2. Check all connections carefully and make
sure that there is no water leakage from any
connection. If there is leaking from a
connection, retighten the connection.
Turn left
T-valve
Hose
4. Connect the hose to the bidet seat.
Retainer Ring
Hose
4. Connect the power
1. Insert the bidet plug into the outlet (120V).
rm the power connection.
Press and hold the power button for 0.5
second to turn on the bidet seat.
10
T-valve.
Publicidad
