Thomasville Outdoor Messina 523148 Instrucciones De Montaje página 2

Page 2 of 2
Assembly Instructions
1. Align the holes of the table legs (C) with the holes in the bottom of the table top (A). Loosely attach each table leg (C) using
a screw (D) and washer (E) as indicated in Figure 1. Do NOT completely tighten the screws at this time.
Figure 1
2. Attach the leg connector bracket (B) to the legs using the remaining eight screws (D) and washers (E) as shown in Figure 2.
When attaching the leg connector bracket (B), insert and start all eight screws before completely tightening any of the screws.
Once all eight screws are inserted, finish tightening each screw (including the four screws from Step 1) using the hex key (G).
After tightening all 12 screws, install the PVC screw covers (F) as indicated in Figure 3.
3. Carefully turn the table over into the upright position.
Messina
Figure 2
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !
TM
Side Table Model #: 523148
Figure 3