Descargar Imprimir esta página

Williams-Sonoma LAINE Instrucciones De Ensamblaje página 9

Publicidad

Pottery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham – GreenRow
07-May-2024
Place the frame cover (F) over the frame (B) .As shown in illustration.
Placez le couvercle du cadre (F) sur le cadre (B). Comme indiqué sur l'illustration.
Coloque la cubierta del marco (F) sobre el marco (B). Como se muestra en la ilustración.
To Make the Wire Connections:
1.
Gently pull existing wire down from the ceiling junction box and allow wires to hang. The HOT or LIVE wire is usually black. The
NEUTRAL wire is usually white. Check to see if there is a ground wire that is usually green or green with a yellow stripe or
exposed copper metal wire. If needed, use a pair of wire strippers to remove about 1/2 inch of insulation from each wire.
Carefully inspect the fixtures wires. The NEUTRAL FIXTURE WIRE is WHITE. The HOT FIXTURE WIRE is BLACK and the
2.
BARE COPPER WIRE
confidence, then we recommend that you ask an electrician and that you not continue with the installation.
With the help of another person to hold the weight of the fixture, attach the fixture wires to the junction box wires as shown in the
3.
illustrations.
Williams-Sonoma Inc.
is the GROUND WIRE. If you have any doubt and cannot identify the power-supply wires with
Instrucciones de Ensamblaje
Connect the GROUND FIXTURE WIRE to
the GROUND J-BOX WIRE using the
Plastic Wire Nut Connector (H) and wrap
the connection with electrical tape. Be sure
that no wire strands are exposed.
Assembly Instructions
Instructions d'assemblage
9/12
USA-A

Publicidad

loading