Panasonic PanaSync E70 Manual De Instrucciones página 3

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord for this unit has been packed separately and has been selected according to the
country of destination and must be used to prevent electric shock. Use the following guidelines if it is
necessary to replace the original cord set.
The female receptacle of the cord set must meet CEE-22 requirements and will look like Figure 1:
For the United States and Canada
In the United States and Canada the male plug is a NEMA 5-15 style {Figure 2} and is UL listed and
CSA labelled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be
used. For units which sit on the floor, only SJT type cord sets may be used. The cord set must be
selected according to the current rating for your unit. Please consult Table A for the selection criteria
for power cords used in the United States and Canada. (The cord set is marked with its Cord Type.)
For European Countries:
In Europe you must use a cord set which is appropriate for the receptacles in your country.
The cord set is HAR-Certified, and the mark
4
HAR
k
will appear on the outer sheath, or on
the insulation of one of the Inner conductors.
If you have any questions concerning the proper power cord to use, please consult with the dealer
from whom you purchased your unit.
Table A
Cord Type Size of Conductors In Cord
Maximum Current Rating of Unit
SJT
18AWG
lOAmps
16AWG 12Amps
14AWG 12Amps
SVT
18AWG lOAmps
17AWG 12Amps
Figure 1 Figure 2