Publicidad
Idiomas disponibles
Idiomas disponibles
Press the
o
then by default set it as the "primary" unit. A beep will
sound. When pairing between both products has been
carried out successfully, the LED 1 of the connected
"secondary" unit stops flashing and a sequence of beeps
will sound.
The "primary" unit LED 1 will still be flashing waiting to
o
pair with the playback device. Once the "primary unit"
has successfully paired with the playback device both
the "primary" and "secondary" units can be played and
controlled synchronously during Bluetooth
mode.
Press the
o
connection, the LED 1 on the connected "secondary"
unit flashes and a signal tone sequence sounds.
NOTE: The product which had its
first will become the "primary" unit (in the left audio
channel), and the other unit will then by default becone
the "secondary" unit (in the right audio channnel).
˜ Cleaning
Switch the product off and remove all cables before
o
cleaning.
Only clean the outside of the product using a clean,
o
dry cloth for cleaning the product and never use any
corrosive liquids / abrasive cleaning agents. Use a
slightly moistened cloth and a mild cleaning agent to
remove stubborn dirt.
When cleaning the speaker, the USB cover should be
o
closed.
button 3 on one of the products which will
button 3 again to break the TWS pairing
playback
®
button 3 pressed
GB/IE
43
Publicidad
