occur in a particular installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SETTING THE TIMER
Twist the bottom of the device until
with your desired timer setting (10, 20, 30 minutes). The timer will begin
counting down each time the device is turned on. At the end of the timer
cycle, all sound and light functions will turn off automatically. NOTE: Changing
any setting (timer, sound or light) while the device is on will reset the timer.
CHOOSING A SOUND
Press the sound button
through sound options.
Sound Option 1:
Shhh
Press or hold
or
To turn off all functions at any time, press and hold
USING THE NIGHTLIGHT
NOTE: The light function can be used by itself or in addition to a sound option.
Press the light button
Light Option 1:
Gentle Pulse
To turn off only the light, press and hold for
is aligned
to turn on the first sound. Press again to toggle
SOUND OPTIONS
Sound Option 2:
White Noise
buttons to control volume.
to turn on the pulsing light. Press again to toggle through light options.
NIGHTLIGHT OPTIONS
Light Option 2:
Constant
Sound Option 3:
Heartbeat
for 2.5 seconds.
2.5 seconds. Any sound option selected will continue.
Important Information
How to Use
Timer Settings
Press Again:
OFF
Press Again:
OFF
3