TFA 60.2514 Instrucciones De Uso página 10

TFA_No. 60.2514_Anleit_07_16
Radio-controlled alarm clock with thermometer
7. Operation
• The instrument will automatically quit the setting mode if no button is pressed
within 30 seconds.
• Press and hold the "+" or "-" button in the setting mode for fast running.
7.1 Manual setting of clock and calendar
• Press and hold the MODE button in normal mode for three seconds. The hour
digit flashes. Press the "+" or "-" button to adjust hours.
• Press the MODE button to make the settings in the following sequence: min-
utes, year, month and day. The last press of the button sets the seconds to 00.
• Press and hold the "-" button to adjust the language for the weekday: English
(EN), German (GE), Italian (IT), French (FR), Spanish (ES), Dutch (NE),
Swedish (SW).
• When the language you want is displayed, release the button.
7.2 Display of temperature, alarm time and dual time
• Each press on the MODE button will change the display between:
Indoor temperature
AL 1
AL 2
Dual time
7.3 Setting the alarm
• Select the alarm function you want with the MODE button:
AL 1
AL 2
• Set the alarm time in the respective alarm mode.
• Press and hold the MODE button for 3 seconds.
18
01.08.2016 13:43 Uhr Seite 10
Radio-controlled alarm clock with thermometer
• The hour digits are flashing.
• Press the "+" or "-" button to set the time you want.
• Confirm with the MODE button.
• Set minutes in the same way.
• Confirm with the MODE button and the alarm is activated.
• To activate or deactivate the alarm function, press the
+ or no alarm symbol appears on the display.
• When the alarm time is reached, the alarm signal will sound and increase grad-
ually in frequency (speed).
• The respective alarm symbol or
for 5 sec. Press the button to stop the alarm.
• You can activate the snooze function by pressing the LIGHT/SNOOZE button on
the top.
• Zz appears and the alarm will be interrupted for 4 minutes.
• If it is not stopped deliberately, the alarm will automatically turn off after 4 min-
utes and will be reactivated for the same time.
7.4 Time setting with time zone
• The time zone setting is needed for countries where the DCF signal can be
received but the time zone is different from the DCF time.
• Press and hold the "+" button in normal mode (time/temperature display) for
three seconds.
• appears on the display.
• Press and hold the MODE button for three seconds.
• The hour digit starts to flash. Press the "+" or "-" button to make a correction
of the hours from the DCF time.
• Confirm with the MODE button.
• Press and hold the "+" button in normal mode (time/temperature display) to
change between DCF time and time zone (Display
button. , ,
flashes and the backlight will come on
).
19