Kenmore 110.26132410 Manual De Uso página 8

Settings shown are default settings for that cycle. Once you select a cycle, the default modifiers or the previous set modifiers for that
cycle will be lit. For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available
on all models�
Items to Wash: Cycle:
Heavily soiled Soak
fabrics
Heavily soiled Whites
white fabrics
Bright or darkly Cold Clean
colored cottons,
linens, casual
and mixed
loads
Large items Bulky/
such as sheets, Bedding
sleeping
bags, small
comforters,
jackets, small
washable rugs
Sturdy fabrics, Heavy
colorfast items Duty
*Wash temperatures vary according to the chosen cycle setting� All rinses are cold�
8
CYCLE GUIDE
Wash Soil
Temp:* Level:
Spin Available
Speed: Options:
Prewash
Two Rinses
Fabric Softener
Steam Treat or
Stain Boost
Prewash
Deep Fill
Two Rinses
Fabric Softener
Steam Treat or
Stain Boost
Prewash
Deep Fill
Two Rinses
Fabric Softener
Steam Treat or
Stain Boost
Prewash
Deep Fill
Two Rinses
Fabric Softener
Steam Treat or
Stain Boost
Prewash
Deep Fill
Two Rinses
Fabric Softener
Steam Treat or
Stain Boost
Cycle Details:
Use this cycle to soak small
spots of set-in stains on fabrics�
The washer will use intermittent
agitation and soaking� After
time has expired, water will
drain, but the washer will not
spin� Cycle is complete�
This cycle adds liquid chlorine
bleach to the load at the
proper time for improved
whitening of soiled white
fabrics�
Cold water with an additional
wash action gently lifts stains
while caring for fabrics�
Settings may be adjusted as
desired but must use only cold
water settings�
Use this cycle to wash large
items such as jackets and small
comforters� The washer will
fill with enough water to wet
down the load before the wash
portion of the cycle begins and
uses a higher water level than
other cycles�
Use this cycle for heavily soiled
or sturdy cotton items� This
cycle combines high-speed
wash action, longer wash time,
and extra high-speed spin to
shorten drying times� Adjust
temperature settings as needed�