Installation Instructions; Safety Instructions; Delivery Scope; Required Tools - Truma S 3004 Instrucciones De Uso

Installation instructions

Safety instructions

Before commencing any work, read and observe the installa-
tion instructions carefully! For more information about installa-
tion, please visit www.truma.com/lighting-kit.
Remove battery cable terminals and disconnect any external
electrical power before starting work. If you are unsure about
the electrical installation, have it checked out by a qualified
Auto Electrician.
The electrical installation must comply with the technical and
administrative provisions of the respective country in which it
is used (e.g. EN 1648-1, VDE 0100-721). National regulations
and guidelines must be observed.
An electro-static charge can destroy the electronics.
Ensure potential equalisation before touching the
electronics.

Delivery scope

1
8
7
0.8 x 6.3 mm
10
Operating
and installation
instructions
Sensor PCB
compl.
Control knob
(gas)
Knob socket
Integrated control
panel for the fan
Cable; control
panel – sensor
PCB
12 V-cable with
fuse holder /
fuse (2 A)
Screws
PZ 3 x 12 mm

Required tools

3
2
(only required from a retrofit kit 1)
0
1 5
4
4
2
3
Screw driver PZ 1
5
6
Retrofit Retrofit
kit 1 kit 2
Pos.
part no. part no.
30470-01 30470-02
1 1
2 1
3 1
4 1
5 – 1
6 – 1
7 1 –
8 2 –
Retrofit
kit 3
part no.
30470-03
2
2
–
–