Maintenance; Service; Accessories; Warranty - Delta DP300L Manual De Instrucciones

Ocultar thumbs Ver también para DP300L:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed
air. All plastic parts should be cleaned with a soft damp
cloth. NEVER use solvents to clean plastic parts. They
could possibly dissolve or otherwise damage the material.
Wear certified safety equipment
hearing and respiratory protection while using
compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs
on the cord plug are making good contact in the outlet. Also,
check for blown fuses or open circuit breakers in the line.
REPLACEMENT PARTS
When servicing use only identical replacement parts. Check
the parts list included for more information. Parts lists can
also be found online at servicenet.deltamachinery.com.
SERVICE AND REPAIRS
All quality tools will eventually require servicing, or
replacement of parts due to wear from normal use. For
assistance with your tool, visit our website at www.
A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and
Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of
your nearest supplier.
SINCE ACCESSORIES OTHER THAN THOSE OFFERED BY DELTA HAVE NOT BEEN TESTED
WITH THIS PRODUCT, USE OF SUCH ACCESSORIES COULD BE HAZARDOUS. FOR SAFEST OPERATION, ONLY
DELTA RECOMMENDED ACCESSORIES SHOULD BE USED WITH THIS PRODUCT.
To register your tool for warranty service visit our website at www.deltamachinery.com.
Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory
which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product
prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years
and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product,
the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer's
authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has
resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an
authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential
damages resulting from defective products. This warranty is Delta's sole warranty and sets forth the customer's exclusive
remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for
purpose, or otherwise, are expressly disclaimed by Delta.

MAINTENANCE

for eye,

SERVICE

ACCESSORIES

WARRANTY

Two Year Limited New Product Warranty
LUBRICATION & RUST PROTECTION
Apply household floor paste wax to the machine table and
extension table or other work surface weekly. Or use a
commercially available protective product designed for this
purpose. Follow the manufacturer's instructions for use and
safety.
To clean cast iron tables of rust, you will need the following
materials: a pushblock from a jointer, a sheet of medium
Scotch-Brite™ Blending Hand Pad, a can of WD-40 ® and a
can of degreaser. Apply the WD-40 and polish the table surface
with the Scotch-Brite pad using the pushblock as a holddown.
Degrease the table, then apply the protective product as
described above.
deltamachinery.com for a list of service centers or call
the Customer Care Department at 1-800-223-7278. All
repairs made by our service centers are fully guaranteed
against defective material and workmanship. We cannot
guarantee repairs made or attempted by others. Should
you have any questions about your tool, feel free to write
us at any time. In any communications, please give all
information shown on the nameplate of your tool (model
number, type, serial number, etc.).
20

Publicidad

Tabla de contenido
loading

Tabla de contenido