Cleaning And Maintenance; Technical Specifications - Velleman VDL150RGML Manual Del Usuario

6. Cleaning and Maintenance

 Disconnect the device from the mains prior to maintenance activities.
Let the device cool down.
 All screws should be tightened and free of corrosion.
 The housing, visible parts, mounting supports and the installation
location (e.g. ceiling, suspension, trussing) should not be deformed,
modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
 Mechanically moving parts must not show any signs of wear and tear.
 The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
 Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.

7. Technical Specifications

power supply .............................. 110-240 V~, 50/60 Hz, 5 VDC
laser class ........................................................................ 3B
laser power
green ................................................... 50 mW (532 nm)
red .................................................... 100 mW (660 nm)
dimensions ................................................. 120 x 90 x 50 mm
weight ......................................................................... 320 g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 04 – 04/08/2016
VDL150RGML
6 ©Velleman nv