Lenco BTP-200 Manual Del Usuario página 9

the same time one unit, tones are heard and stereo pair data are
erased on this unit.
2. And then, short press the "
other unit, tones are heard and stereo pair data are erased on this unit
too.
3. And now, two speakers can be found and pairing by the mobile device
at the same time.
4. Does the above mentioned methods of stereo pairing function on two
speakers if you want to activate this function again.
5. Active again the stereo pairing functions on two speakers at any time
you want them to.
N. Reset the device
1. In some circumstances the device's function may hanging and need to
reset. To reset the Bluetooth speaker;
2. To power reset the device, press the "
same time, the device is reset and turn to OFF, and then press and hold
" (2)" button to turn On and restart the device after reset is done.
O. Trouble Shooting
No power
No sound
No response
from speaker
P. Specification
Unit Dimension
Unit Weight
Bluetooth
Built-In Battery
and
 Check battery is it charged with enough energy.
 Check whether the device is in power OFF mode.
 Check whether volume level is in lower position on
your speaker and mobile phone or PC/Mac.
 Make sure that your Bluetooth device is within the
effective operation range.
 Check whether the Bluetooth device is paired.
 Check whether the Bluetooth device show
connected.
 Check if you have selected the correct audio
source.
 Restart the speaker by reset function.
58.3 mm (L) x 71 mm (H) x 34.3 mm (D)
112.5g (Approximate) per unit
Specification
Supported Profile
Connection Distance In 10 meters (open area)
Lithium 3.7V, 600mAh
Playing Time: 5 ~ 6 Hours (at 75 ~ 80% of
volume setting)
" buttons at the same time on the
(9) and
V2.1 + EDR
A2DP, AVRCP, HSP
9
(8)" button at the