Prima Klima lucilu shuttle 6 Instrucciones De Uso página 3

Ocultar thumbs

página de 8

/ 8
Marcadores

Idiomas disponibles

Content:

1x led lighting for professional gardening

Lucilu Shuttle 6 Operating Instructions

General information:

Congratulations! You have bought a highly efficient led

lighting for growing plants which will bring joy both to you

and your plants. Components used in the lighting were

made by the leading manufacturers such as OsrAM or

luMIled. The light spectrum is suitable both for growing

cuttings and planting. In order to use the three-year

warranty, you first have to register the device or have the

seller stamp the warranty certificate with the date of the

sale and submit it in the event of a warranty enforcement.

It is also possible to remove modules during operation for

cleaning the 40-Watt modules or when replacing them

with a different light spectrum. Intelligent power driver

automatically adjusts the power output to the number of

modules. For example, this allows you to use lighting even

with just three functional modules.

In order to create optimum conditions both for the lighting

and for your plants, we recommend that you let a weak air

stream blow on the heatsinks, for example by using a fan.

by doing so, heatsink temperature will decrease by ΔT up

to 15°C.

Safety instructions:

do not use the lights outdoors or expose them to excessive

humidity. Ambient temperatures between 17 to 23°C are

ideal for operation of the lights; avoid temperatures above

28°C as your plants will stop growing at 30-32°C.

In principle, it holds that: the higher the operating

temperature of electronic components, the shorter their

lifespan.

do not look directly into the light of led lightbulbs, protect

your eyes by wearing suitable eye protection!

In case you are going to use our uV FAr red modules, even

partially, you need to wear eye protection against uV!

Maintenance:

disconnect the power supply to the lights before

performing maintenance! Check and clean the modules

every six months. Clean the polycarbonate led lightbulb

lining using only damp cotton cloth or microfiber cloth.

never use cleaners based on solvents! Otherwise, the lights

require no maintenance.

Warning!

UV light

PrIMA KlIMA TrAdIng CZ, s.r.O.

ZáMOsTí 594, 33828 rAdnICe,

CZeCh rePublIC

2x hanging hooks

Wear eye

protection

Tel.: +420 371 795 340

www.primaklima.com

Betriebsanleitung (Seite 2)

Operating Instructions (page 3)

Mode d'emploi (page 4)

Instrucciones de uso (página 5)