Display And Control Elements - SEVERIN Fino Latte KA4565 Instrucciones De Uso

Fino Latte KA4565

4. Display and control elements

4.1 Display elements
4.2 Control element
32
Preparation (H.1)
– Flashes during preparation process
– Flashes fast during the preparation process if the appliance needs to be
descaled
– Flashes during descaling process
– Is lit during adjusting of the beverage quantity, see section
"3. Preparation of beverages"
Error (H.2)
– Flashes in case of error/fault, see section "6. Fault finding and
troubleshooting"
– Flashes during descaling process
Start/Stop button (H.3)
– Brewing process is started by pressing this button
– Brewing process is terminated by pressing the button again
– In case of an error/fault, troubleshooting function is activated by
pressing the button
– By pressing permanently this button with the strainer support
inserted you set the desired quantity of beverage/milk froth or
milk during the preparation process, see section "3. Preparation of
beverages"
By pressing and holding without the strainer support inserted
–
the "descaling" mode is activated, see section "5
maintenance"
Note: By means of the Start/Stop button
factory settings, see section "5
Cleaning, care and
.
you can also restore the
Cleaning, care and maintenance"
.