Installation Instructions; Construction; Location - Hoshizaki IM-240DNE Manual De Instrucciones

I. INSTALLATION INSTRUCTIONS

1. CONSTRUCTION

2. LOCATION

This icemaker is not intended for outdoor use.
The icemaker should not be located next to ovens, grills or other high heat producing equipment.
This appliance is not suitable for installation in an area where a water jet could be used.
The location should provide a firm and level foundation for the icemaker.
Do not place anything on top of the icemaker or in front of the louver.
Normal operating ambient temperature should be within 1°C to 40°C. Water connection is cold water only. Operation of the
icemaker, for extended periods, outside of these normal temperature ranges may affect production capacity.
Allow the clearance specified below for proper air circulation and ease of maintenance and/or service should they be required.
[Air-cooled model]
[Water-cooled model]
[Remote Air-cooled model]
Top Panel
Front Cover
Bin Door
Storage Bin
Adjustable Legs
IMPORTANT
Top View
Rear
30cm
Left
15cm
ICEMAKER
Front
Top View
Rear
15cm
Left
15cm
ICEMAKER
Front
Louver, Air Filter
(Air-cooled Model)
WARNING
CAUTION
NOTICE
Right
50cm
Side View
Right Front
15cm
3
ENGLISH
Power Cord
Top Kit IMD
Handle
Side View
Top
30cm
Front
30cm
ICEMAKER
Top
15cm
Rear
15cm
ICEMAKER
Rear