Hama PA-005 USB Instrucciones De Uso página 4

G Operating instruction
Controls and Displays
1. MM/MC
2. RCA
3. Mini USB
4. LINE IN/OUT
5. Earth
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• 1 „PA 005" stereo phono preamplifier
• 1 USB cable
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commer-
cial use only.
• The product is intended for indoor use only.
• Keep this product, as all electrical products, out of
the reach of children!
• Connect the product only to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the
power cord from the socket.
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to qualified
experts.
• Do not open the device or continue to operate it if
it becomes damaged.
2
4. Functions
To avoid all the hassle that was previously required to
digitalize records, the HAMA stereo preamp "PA-005
USB" offers characteristics of a preamp as well as an
audio interface between the record player and PC.
The "PA-005 USB" also offers additional functions
such as a switchable line-in and line-out and a
switch for the two magnet systems MC and MM. The
signal LED is lit constantly to indicate standby mode
and blinks to indicate recording.
5. Start up and operation
5.1 Recording from a record player to a PC or
notebook (Pic. 1)
Preparation
• Connect your record player to the "PA-005 USB"
via an RCA cable.
• Connect your PC via a USB A to mini USB (5-pin)
cable.
• Ensure that your record player has a magnetic
pickup. If your record player has a separate ground
lead, connect it to the additional screw.
• The "PA-005 USB" is detected as USB headset by
the PC or laptop; you therefore have to switch from
"microphone" to "LINE" on the PC or laptop.
Use
• Switch your record player on and place a record on it.
• Begin playback of the record.
• You can switch the MM/MC switch to select the
correct magnet system of your record player.
• Start the recording program on your PC or notebook.
Note
You can download different audio software on the
internet (e.g. Magix Audio Cleaning Lab)